2-Way switching with Intermediate

[freshy]

Hi,

I want to install a Remote Control Dimmer Switch on a 2-Way switch with intemediate.

The remote dimmer switch is from tlc...
http://www.tlc-direct.co.uk/Main_In...s_All/Wiring_Accessories~Dimmers_5/index.html

One of the switches is a 2 Gang and also control another light, like the diagram below.

[/img]

What I need to know is if I replace the 2 Gang 2-Way switch with this
http://www.tlc-direct.co.uk/Products/VLIQ1252.html

Will i need to replace the intermediate & other switches with matching slaves? If so which ones?


Thanks

Freshy

 

[Spark123]

Ignore the diagram you have posted, the dimmer switches need to be wired like as per: http://www.tlc-direct.co.uk/Technical/DataSheets/Systems/TouchRemote.htm Note for this you need to have all 3 wires available to each point.
Is it viable to have the other light on a dimmer, use a double master switch there otherwise you'll need to separate them out, leaving you with two single accessory boxes. The other 2 way and the intermediate switches need replaced with http://www.tlc-direct.co.uk/Products/VLIQS001.html.

 

[freshy]

Thanks for the quick response.

I don't have all three at the intermediate switch, therefore I think I will have to leave the switches as they are

Cheers

Freshy