Air in radiator

Joined
7 Sep 2008
Messages
599
Reaction score
27
Location
Kent
Country
United Kingdom
Following our boiler replacement everything is working fine. But the radiator in the back bedroom (nearest the pump and the highest in the house) needs bleeding about once a week - quite a lot of air in there. What can I do to stop this? It's obviously sucking air in from somewhere.
It's an open-vented system (Baxi condensing boiler) with the usual arrangement of expansion tank in the loft with open vent over it, plus pump etc. in the airing cupboard underneath.
 
Sponsored Links
It may well be disolved oxygen in the water or hydrogen gas forming rather than sucking in air although that is still a possibility.Either way you should get you installer back to check this out.
 
Sponsored Links
Thanks chaps. I've turned the pump down from the highest to the middle setting. If that doesn't work I'll get the installers back. What could be done if it is dissolved gases in the system - what's the cause? Fingers crossed in the meantime!
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top