i just changed the diverter valve in my baxi 80e and i can't get the thing to work now. the problem is that although the pump runs the pin that operates the microswitch does not move. i checked for bent pin, torn diaphram, blocked hole etc. but it all seems fine as you would expect it to being a new valve. if anyone has any suggestions for what i've done wrong i would be very grateful to here them.
baxi combi 80e diverter valve
- Thread starter tommyr
- Start date
Sponsored Links
which pin? dhw ch?
Nath
Nath
Sponsored Links
the boiler fires up but makes very strange noises. was too scared to leave it running for long enough to see if water got hot.
did refill, checked cap on pump bleed valve was not tight, should i of done anything else? the noises could well of been air but the bleed is supposed to be automatic.
did check pump was clear.
did refill, checked cap on pump bleed valve was not tight, should i of done anything else? the noises could well of been air but the bleed is supposed to be automatic.
did check pump was clear.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local