Best Pipe Lagging to avoid sub- zero stop-tap water Freezing

Joined
21 Feb 2021
Messages
386
Reaction score
1
Country
United Kingdom
My stop- gap pipe is not near any of our radiators, that area gets very cold. I'm concerned that the water will freeze. Any tips on best lagging?
 

Attachments

  • 20250111_155313 (1).jpg
    20250111_155313 (1).jpg
    165.4 KB · Views: 18
  • 20250111_154952.jpg
    20250111_154952.jpg
    353.8 KB · Views: 17
Sponsored Links
Do you mean stop-tap?

The incoming water supply?

Is it inside the house?

yes but no radiator there. Its by the front door.

I've only had a boiler since last winter. |Before that the pipes would freeze every winter when we had a couple of days of sub zero temperatures
 
If you aren't on a water meter, leaving a basin/sink/garden tap, very slightly open, may be enough to prevent the pipe from freezing.

I am not a plumber though...
 
Sponsored Links
A picture would help enormously. If it is in a cupboard or similarly non heated space then just wrap it in loads of loft insulation.
 
yes but no radiator there. Its by the front door.

If it is inside a heated house it is most unlikely to freeze.

You can use stiff plastic foam pipe lagging, which is like slitted tube. The thicker the better. Foam has twice the insulating power as the same thickness of mineral wool. Felt is not much good.

If it is against a cold external wall, insulate it from the cold wall rather than the warm room.

Examples

 
A picture would help enormously. If it is in a cupboard or similarly non heated space then just wrap it in loads of loft insulation.
 

Attachments

  • 20250111_154952.jpg
    20250111_154952.jpg
    353.8 KB · Views: 11
  • 20250111_155313 (1).jpg
    20250111_155313 (1).jpg
    165.4 KB · Views: 10
If it is inside a heated house it is most unlikely to freeze.
Really? There are no radiators near it which is what I emphasised in my OP. Now if my stop-tap was near a radiator in a bedroom then yeah i understand your point...but as you can now see ,it isn't ,it's in a cupboard in the hall....freezing cold
 
Keeping clear of the electrical supply, if it's that cold then I'd cover all of that with loft insulation and then wrap it up in a black plastic bag and then tape it up, just for the winter
 
If it gets to -10° outside, you could have a problem,. but not at zero , I think. Put a wee pot of water down there as an indicator. Or a thermometer!
Remember the floor won't get anything like as cold as the air outside, so any sort of cover over the lot like a cardboard box would probably do enough.
All depends where you live!
 
It looks like it comes up through the floor. Is it a concrete floor, or wooden, with a void beneath?

Look outside, where are the airbricks?

The front will be an external wall, but what is on the other side of the other wall?

Where is the nearest electrical socket?

Is it in a cupboard?
 
K flex lagging would be easier to work with in a location like that than the rigid grey foam pipe lagging that is already fitted, though perhaps even simpler to shroud the lot in expanding foam
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top