Bush RLSFOX Glass door

[aust240378]

Hi all,

I took the door of my BUSH single oven apart to clean it, which involved removing two screws at the top of the door, removing a bracket and removing the inner glass,

When I did it however, two rubber pieces fell out and I can't see where they would go, I reassembled the door, slid the glass in and put the bracket back on and ran the oven and it doesn't seem to have affected anything, can anyone shed any light please? They don't hold the glass in or stop if moving about so I'm at a bit of a loss.

Thanks!

 

[freddiemercurystwin]

How did they just fall out? When you clean the glass you do it from the top. Did you take the door off to clean the glass? They look like spacers or similar that hold the glass in the correct position.

 

[jj4091]

https://fixpart.co.uk/product/gorenje-857649-fixture it appears they are fixing blocks for the glass and I would guess they fit at the end of the channel that the glass slides into or the back of the cover that fits over the outer edge of the glass to stop it sliding about when you open and close the door