can i add a photocell to this setup? advice

Joined
18 May 2010
Messages
305
Reaction score
2
Location
Belfast
Country
United Kingdom
I need to add a photocell to this setup. If need be il get an electrician in but need to know before hand if it is possible.

I have 4 outside lights - see pics. I know the pictures are not great but there are 2 lights outside the garage and 2 additional ones were put in by the front door by previous owner which from looking at the wiring come off the 2 by the garage.

Over to the experts on here - can a single photocell be put in and would that turn all 4 lights on? and what point in the wiring would that go? Thank you.
 
Sponsored Links
Hi,that wiring looks rough, your electrician may want to tidy it up or re-wire it. Yes you can control all 4 from 1 photocell.

Regards,

DS
 
Bit hard to follow the pictures, but you need to find one point where you have;
1) the switch live (the live to the lights)
2) permanent live (constantly live)
3) neutral
4) earth

A 3 core and earth cable can be used to go to the dawn to dusk sensor.

It may be easier to fit two sensors, if all the lights weren't previously controlled by just one switch.
 
hi yes the lights are all on one switch - the two front lights had just been added at a later date thank you
 
Sponsored Links
That's going to cost a lot to run.

I think you want a better solution etc pir sensor.

And a seperate circuit fir the flood lights
 
just to confirm the floods are on a pir and separate. the lanterns are on 8w bulbs so pretty cheap to run
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top