Are there any guidelines for the proximity of a cooker switch to a gas hob? I know it shouldn't be behind the hob and that sockets should be 300mm form the hob edge. Not sure about the cooker switch though. I'd like to put it about 200mm from one edge but can easily put it at 300mm if that's required. Steve.
cooker switch proximity to gas hob
- Thread starter steve1811uk
- Start date
Sponsored Links
Steve, I'd say 300mm would be better but a pro may be able to tell you if 200mm is acceptable.
Regards
Fred
Regards
Fred
What you're trying to achieve, is that no-one has to lean over the hob to turn it off, for example in the event of a chip-pan fire.
But it must be with 2m, again so that you can easily see it in such an emergency, and know what it's for.
But it must be with 2m, again so that you can easily see it in such an emergency, and know what it's for.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
