Does this lath and plaster wall look safe to remove?

Joined
15 Apr 2015
Messages
7
Reaction score
0
Location
Buckinghamshire
Country
United Kingdom
I'm trying to expand our loft hatch and install some better steps. First stage was to remove a lath and plaster wall separating the cupboard where the hatch is from the bedroom.

And this is where I'm at now, that wood looks thicker than I was expecting, that framework is the darker wood in the third photo taken from inside the loft.

What's the best course of action now? I suspect this is a job better suited to a pro, even though the wife is telling me it will "probably be ok to remove it" :unsure:

being bit pessimistic, if we got someone in who said that framework has some structural function, what would our options be? Plasterboard it all back over and forget the larger hatch?
 

Attachments

  • 20241106_101911.jpg
    20241106_101911.jpg
    251.7 KB · Views: 30
  • 20241106_101949.jpg
    20241106_101949.jpg
    241.9 KB · Views: 34
  • 20241106_102021.jpg
    20241106_102021.jpg
    398.3 KB · Views: 30
  • 20241106_102030.jpg
    20241106_102030.jpg
    329.5 KB · Views: 34
Sponsored Links
Not very wide so if timber is bridging cupboard then I can't see why you cant take support out over that door. Was that what you wanted to do?
Timbers were always bigger years ago Vs the thinner timbers seen today.
Just look at it and decide for yourself if there is going to be a problem.
If unsure get advice but a tradesmen might not want to advise so you will end up employing a structural engineer.
You also have vermiculite. Consider testing that for asbestos. Not sure what the latest thinking is but I left alone
 
Thanks @Wayners for your answer

it seems more complicated because, the two timbers I've marked with yellow arrows go into the brick wall on the right, which is the wall between me and the neighbour.

So now I don't know if those timbers are serving just as a top plate for the partition wall or if they have bigger function for the loft joists above. That partition wall is halfway between front and back walls so it wouldn't be a surprise to see it acting as some half-floor support for the loft joists - obviously, that would make things trickier.

I'd appreciate if anyone else has seen similar structures, the house is 1905 construction.

Yes, we wanted to expand the hatch that you can see but those two big timbers are right in the way. I won't do anything silly and it seems like I will have to get SE in to have a look, but would appreciate any comment from anyone who's seen similar.

20241106_101911 - Copy.jpg
 
Sponsored Links
Our truss that spanned our neighbours got cut off at the wall on our side. Structural architect was involved through
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top