Easy fill on walls

[RMS]

using quality equipment in painting and decorating is a must if you require a decent trade finish. If by calling me a "bad workman" means that i could not get a quality finish with some of the harris diy brands then so be it. As a decorator i choose to use quality brushes and tools for the finish they give. I tend to use a hamilton 7 ring hanging brush for wallpapering and would not dream of or advise anyone to use the pack you suggest. But there again i bow to your superior knowledge of this product.

What a load of rubbish!

 

[elrobbo82]

You don't half talk some ***. Most of the advise you give is wrong.

What a load of rubbish!

 

[TheDec]

You don't half talk some ***. Most of the advise you give is wrong.

What a load of rubbish!

Yes,

That just about sums it up.

Dec

 

[elrobbo82]

i'm sorry, i have used one harris product that i found gave a half decent finish (microfibre roller). i steer clear from their products due to the poor quality. the advice i give is based on my experience through many years in the decorating trade and to say most of my advice is wrong is not acceptable. people will have different ways of doing things and to say that there isn't is also wrong. and again nice to see relevant input from starspark (don't forget you've been warned about this).

 

[elrobbo82]

i have had customers show me this "harris contractors pack" and it looks identical to this http://www.diy.com/diy/jsp/bq/nav.j...cationsProductType=wallpaper_tools&isSearch=f
also looks like they've changed the name. this is certainly not a product i or any other self respecting decorator should recommend or am i wrong?

 

[RMS]

elrobbo,

please give it a rest. It's up to the individual what they choose to use. I am not about to judge anyone based on the tools they use, only on the job they produce.

Stop trying to wind the forum up!

 

[elrobbo82]

elrobbo,

please give it a rest. It's up to the individual what they choose to use. I am not about to judge anyone based on the tools they use, only on the job they produce.

Stop trying to wind the forum up!

if i give this impression i am truly sorry, it is not my intention. i am just giving out my advice on this product. i would not personally recommend it but it is the op's choice at the end of the day.

 

[TheDec]

You don't half talk some ***. Most of the advise you give is wrong.

Spot on,

Dec