Chirpy.
Pleased to see we are making you think on your own.
You are putting your decimal point in the wrong place.
11.2kg/m2 is .0112 x 9.81 = 0.1098 which = 10.98kn/m2.
Regards the factor of 10 we would multiply 11.2kg by 10 to give 11,2kn/m2. A few kn here or there are not making that much difference in load factor.
You have no live load, no floor dead load, only dead load of plaster board and skim plus any possible insulation load. The dead load of the joists will be included in the design
Google and bookmark this site. It will help you learn.
Kilonewton Per Square Meter Conversion Chart - Convert-Me
It takes a bit of working out, come back if you need help.
Go through your span tables and let us know what you do not understand, and will put you right
When we get a minute we will give you a list of imposed and dead roof loads.
If you want any general tips on stud work or if you are going to insulate ceiling or studs, then let us know and will point you in the direction.
All the best lad. oldun
Pleased to see we are making you think on your own.
You are putting your decimal point in the wrong place.
11.2kg/m2 is .0112 x 9.81 = 0.1098 which = 10.98kn/m2.
Regards the factor of 10 we would multiply 11.2kg by 10 to give 11,2kn/m2. A few kn here or there are not making that much difference in load factor.
You have no live load, no floor dead load, only dead load of plaster board and skim plus any possible insulation load. The dead load of the joists will be included in the design
Google and bookmark this site. It will help you learn.
Kilonewton Per Square Meter Conversion Chart - Convert-Me
It takes a bit of working out, come back if you need help.
Go through your span tables and let us know what you do not understand, and will put you right
When we get a minute we will give you a list of imposed and dead roof loads.
If you want any general tips on stud work or if you are going to insulate ceiling or studs, then let us know and will point you in the direction.
All the best lad. oldun
