I have an outlet on a bay flat roof in the rear left side. Water flows towards the wall of the house and then down to this outlet. However, some water spills around the front side of the outlet and runs of the roof edge, causing dripping. The front edge is flat, with no raised profile.
Is there an easy way to just hold the water back a little in this are so it naturally all falls into the gully.
I thought about cutting some lead and forming it into a long thin tube and gluing this to the edge of the roof to create a small barrier.
Any other solutions ?
Is there an easy way to just hold the water back a little in this are so it naturally all falls into the gully.
I thought about cutting some lead and forming it into a long thin tube and gluing this to the edge of the roof to create a small barrier.
Any other solutions ?