Flexible tap tails?

Mike53 · 2025-01-16T17:29:43+0000

I bought 2 cheap stainless steel taps off ebay for my boat and am looking to buy flexible tails. As it is not indicated on the box or in the ebay listing I am unsure what threads they are. The bore is about 16.5mm and the maximum diameter of the threads is a little under 20mm. I have looked up the spec for 1/2" bsp and understand the OD of the threads should be 20.9 mm.

I guess I have bought taps with an odd thread?

Are tails available for these taps?.

Additionally I will be fitting them to 15mm plastic pipe, what fitting do I need?

Advice most welcome

Thanks

Mike

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Flexible tap tails?

Mike53

DIYnot Local

Similar threads