Hey guys, I’ve got to remove some electronic air filters attached to a wall. They’re hard wired into fused spurs. Is it safe enough for me to isolate the power, remove the face of the spur, disconnect the filter wire and replace the face? This will leave a fused spur with live wires from the circuit but with nothing hard wired in. Is this no different to a 3 pin plug socket without anything plugged in? Thanks.
Fused spur
- Thread starter MK22
- Start date
Yes, that's fine - just make sure you leave some misleading labels on the switches to really confuse future occupants - i.e. "Dungeon Lighting" 
Haha thanks. Is it worth me removing the fuse as well or does that make no difference?Yes, that's fine - just make sure you leave some misleading labels on the switches to really confuse future occupants - i.e. "Dungeon Lighting"
- Joined
- 27 Jan 2008
- Messages
- 25,831
- Reaction score
- 3,063
- Location
- Llanfair Caereinion, Nr Welshpool
- Country
No difference.
Flux Capacitor Charger.Yes, that's fine - just make sure you leave some misleading labels on the switches to really confuse future occupants - i.e. "Dungeon Lighting"
Hadron Collider.
Launch Control.
And one labelled DO NOT TURN ON which causes the audio from this:
Last edited:
Brill idea - I think I will construct a few of those gadgets to prevent any false sense of calm, you can not be too careful these days . I suppose it could be considered as an apprehension intensifier or something.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local