Hello,
I have a Stelrad Ideal Elan boiler with Honeywell ST699 timer and dial type thermostat.
The timer controls the hot water and heating.
I have a hot water tank in the loft which is filled via the boiler.
When the hot water is selected, the boiler fires up and works fine.
When the heating is selected, nothing happens.
With the heating on, 240V is supplied to the thermostat. With it off, there is no supply to the thermostat.
When the thermostat is rotated to below room temperature one of the 3 terminals goes from 240V to 0V, so I guess that it is working?
The only other thing to note is that a fuse tripped in the house 2 days ago.
The heating failure was first noticed this morning.
Any advice please?
Ian
I have a Stelrad Ideal Elan boiler with Honeywell ST699 timer and dial type thermostat.
The timer controls the hot water and heating.
I have a hot water tank in the loft which is filled via the boiler.
When the hot water is selected, the boiler fires up and works fine.
When the heating is selected, nothing happens.
With the heating on, 240V is supplied to the thermostat. With it off, there is no supply to the thermostat.
When the thermostat is rotated to below room temperature one of the 3 terminals goes from 240V to 0V, so I guess that it is working?
The only other thing to note is that a fuse tripped in the house 2 days ago.
The heating failure was first noticed this morning.
Any advice please?
Ian