I have a Hotpoint WD860. It starts to fill for about 10 - 15 seconds then beeps and displays END and then. flashes F-04. I have replaced the pressure switch and the clear tube from the pressure switch down to the filter is ok. I have also cleaned out the filter. The problem is it is still doing the same thing. Any ideas please
Hotpoint Washer/Dryer
- Thread starter Kiwiian
- Start date
Sponsored Links
Does the drum try to rotate
Are you reading the error code correctly is it light 4 which is F01 motor Triac
or light 2 F04
sorry for asking just want to make sure as the lights and codes can be misleading at times
Are you reading the error code correctly is it light 4 which is F01 motor Triac
or light 2 F04
sorry for asking just want to make sure as the lights and codes can be misleading at times
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
