hi all first time post, need some help and advice if poss.
i am fitting a towel warmer to bathroom as plumber p***** off with money b4 job was finished.
anyway the old radiator was removed with the thermostat valves left on the 8mm pipe coming up from floor.
my problem is how to drain the ch system so i can fit the new towel warmer without flooding house.
there are about 5 or 6 pipes going in to boiler and 3 of them have open and close valves on them (if this helps)
thanks for any help
i am fitting a towel warmer to bathroom as plumber p***** off with money b4 job was finished.
anyway the old radiator was removed with the thermostat valves left on the 8mm pipe coming up from floor.
my problem is how to drain the ch system so i can fit the new towel warmer without flooding house.
there are about 5 or 6 pipes going in to boiler and 3 of them have open and close valves on them (if this helps)
thanks for any help