Install O.N.T.

[Martyn Bell]

I was unable to be connected to full fibre about a week ago, but Open Reach left me the O.N.T, (which we agreed on its location). The fibre cable has not yet been installed. I want to install the O.N.T to save time when hopefully they return, (it's only 2 screws). My question is how close to the fibre cable entry (straight through the wall) should I fit it bearing in mind fibre cable minimum bend radius. The O.N.T is Adtran GPON 1 port ONT SDX611.

 

[spile]

I’d place where is convenient for you.OR will lie the fibre accordingly after taking into account bend radius. My fibre was fitted to the rear of our property.

 

[Diver Fred]

Locate it where you want it. The ONT requires locating near to an electrical socket that will service that permanently. Do prepare the 'route' for the fibre to it. The ONT will have a (LAN) cable to connect to the router. The router is best placed close to the centre of your house and also requires permanent power.

 

[Martyn Bell]

Thanks for your help.