Hi all
I have just moved into a flat with a Neff integrated dishwasher (S5943X2GB).
It runs for absolutely ages and doesnt heat the water.
I have had the side off and checked the following:
Heater element has a resistance of 23 ohms.
The pressure switch works properly
The NTC/Thermostat at the top measures 0 ohms (closed) and 50Kohms at room temperature.
The PCB shows no burnt traces or dry solder joints.
I have ran the machine with a multimeter on the heating element and do see 230 volts for a bit. I didnt wait to see how long for however.
It makes no odd noises and the pressure is very good.
Any ideas?
I have just moved into a flat with a Neff integrated dishwasher (S5943X2GB).
It runs for absolutely ages and doesnt heat the water.
I have had the side off and checked the following:
Heater element has a resistance of 23 ohms.
The pressure switch works properly
The NTC/Thermostat at the top measures 0 ohms (closed) and 50Kohms at room temperature.
The PCB shows no burnt traces or dry solder joints.
I have ran the machine with a multimeter on the heating element and do see 230 volts for a bit. I didnt wait to see how long for however.
It makes no odd noises and the pressure is very good.
Any ideas?