What about Measuring and recording Flow and return temps and the line:
New boiler in :- All went ok but now how to set it up?
- Thread starter jonnywells
- Start date
What about Measuring and recording Flow and return temps and the line:
Sponsored Links
- Joined
- 21 Sep 2007
- Messages
- 76
- Reaction score
- 1
- Country
He did go over stuff with me. I asked what the boiler stat should be set to as he said close to max and how to clean the TF1.
All i was wondering if what he said will make it max efficiency. I think the outlet was recorded at 85c and the return at 66c.
I am unsure how the pump overrun thing works with the system, i did see him taking the carpets up and putting an extra wire up where the pump is....but when ive been watching the pump it does seem to switch off when the boiler does, although its been only a couple days and not always managed to pop my head in the airing cupboard to have a lookie what its doing.
All i was wondering if what he said will make it max efficiency. I think the outlet was recorded at 85c and the return at 66c.
I am unsure how the pump overrun thing works with the system, i did see him taking the carpets up and putting an extra wire up where the pump is....but when ive been watching the pump it does seem to switch off when the boiler does, although its been only a couple days and not always managed to pop my head in the airing cupboard to have a lookie what its doing.
Oh dear
.- Joined
- 21 Sep 2007
- Messages
- 76
- Reaction score
- 1
- Country
Sponsored Links
Because it is wrong.
But I'll let the almighty knob end that is Joe 90 explain why.
Let's just say, that running your boiler that high will do it no favours:
But hey what do I know.
But I'll let the almighty knob end that is Joe 90 explain why
.Let's just say, that running your boiler that high will do it no favours:
But hey what do I know
.- Joined
- 21 Sep 2007
- Messages
- 76
- Reaction score
- 1
- Country
OOOOOOOO what do them pictures show me?
An abused WB boiler with a slightly cooked heat exchanger.
- Joined
- 28 Oct 2005
- Messages
- 31,281
- Reaction score
- 1,997
- Country
Because it is wrong.
But I'll let the almighty knob end that is Joe 90 explain why
Hey bully boy - you aint talking to your wife now ya know.
Stop being an evasive wimp and explain why seeing as you advocate cheaper is better.
I know who I am deary. Come on and answer. Thought you were the grand master know it all?
i bet those temps are made up anyway
Who the fook do you think you are? Come on bully boy - let's see what a hero you are.
Correction.
Who do you think YOU are.
Gas registered- you are not.
Competent to touch a boiler OR give advice to the general public - you are not.
Spacktard- you are
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
