Panasonic Bread Maker

[motco]

Well scusi! I owe Ducati (the brand of the current capacitor) an apology! Certainly the cap had declined to 2.3 microfarads but it is not the reason for less than optimum rise. The RS one in situ results in a 'large' wholemeal loaf with a crown that does not rise above rim of the pan. Perhaps it is a seasonal wheat effect. Or maybe a yeast batch variation - only time will tell.

 

[Rufusz]

Hi all!
I have an SD2511 bread maker with the "flat bread" symptoms. I checked the capacitor mentioned it this thread with a multimeter and it says 2.97 mF. So basically it looks OK. Can it be still faulty so worth changing?
BTW I checked the belt as well and it seems fine I can't get it to slip while holding one wheel.

 

[Excaliber]

Hi everyone, first timer. I have a Panasonic sd2501. It failed to go today and I found a resistor on the pcb has had a dry joint on one leg which I think has overheated the resistor. It is the large resistor R76 which is the one just under the blue wire in the picture in the initial post above. Can anyone identify type and resistance so I can try to track one down please.

 

[Mottie]

Hi all!
I have an SD2511 bread maker with the "flat bread" symptoms. I checked the capacitor mentioned it this thread with a multimeter and it says 2.97 mF. So basically it looks OK. Can it be still faulty so worth changing?
BTW I checked the belt as well and it seems fine I can't get it to slip while holding one wheel.

I was having 'flat bread' symptoms and had been having them for a while. I suspected it was a capacitor problem. I was using the original instruction with regard to quantities of ingredients. I used to buy the container of yeast but used it so little that I thought it was going off so I switched to the sealed sachets (Sainsbury’s own). I would use the recommended quantity from the sachet and throw the rest away so wasting about two thirds of the sachet. Wasn’t having great success. By chance, I read the instructions on the box and it said to use the whole sachet per 500g loaf and only use 320ml of water instead of the recommended 350ml in the Panasonic instructions. Result - perfect loaf!

 

[motco]

The water quantity varies in Panasonic's instructions depending on the machine. I used to have an earlier model and it said 360ml whereas the current 2501 says 370ml. Incidentally they changed from tbsp to tsp for the sugar. A 3:1 ratio.
I am back to having sub-ideal loaves and will strip the machine again and check the capacitor and drive belt... ho hum.

 

[Csfulham]

You guys are all amazing! I have a Panasonic SD-255 that I’ve used regularly for about 16(!!) years. The last few years it’s produced pretty stodgy bread, seldom rising above the pan; and the last couple of weeks it’s been getting even worse.

So today I replaced the capacitor using the above instructions. I bought one on amazon for £7
https://amzn.eu/d/h9T3zXC

I’ve put it all together again and started a cycle and the mixing motor is really going for it, with a renewed energy that I haven’t heard for some years!

Hopefully all is now well and thanks to this forum for saving me over £100 on a new bread maker!

 

[freddiemercurystwin]

Is the thread that keeps on giving!

 

[Csfulham]

Not had a loaf like this in at least five years!