Pass thru wall plate? for washing machine cable

[Draughtsman]

I'm arranging a washing machine cable to exit a bathroom, thru an interior brick wall, to a FCU on the far side. Outside zone 2.

Is there a 'pass tru' wall plate available for the bathroom side, maybe with a single gang back box, to tidy it up. Rather than just having the washing machine cable hanging out of a hole in the wall?

If it exists I'm struggling to find the right search term.

Thank y'all kindly

Dain

 

[EFLImpudence]

Flex outlet plate - best with an inconspicuous outlet at the bottom, not a hole in the middle.

 

[EFLImpudence]

I'm arranging a washing machine cable to exit a bathroom, thru an interior brick wall, to a FCU on the far side. Outside zone 2.

You can have an FCU in the bathroom - even in zone 2 as long as it doesn't have a switch.

You can have a switched FCU in the bathroom outside zone 2.

 

[sparkwright]

A brush plate may be of use.

 

[Sureitsoff?]

as efl says like this (you dont have to use the terminals )
https://www.amazon.co.uk/Click-PRW0...FKYY6EZDQ5A&psc=1&refRID=Y7MP03XX5FKYY6EZDQ5A

 

[securespark]

I use bottom entry flex outlet plates in the room and take the flex straight through unmolested to an FCU on the other side of the wall

 

[ericmark]

I used these brushes called flex outlet plate, part of the LAP grid system, it allowed a host of cables to go between two rooms.