Hi all,
This is my first post, so I join your community! I will try to detail thoroughly the issue. I have attached pictures!
We have a problem in the flat where the fuse corresponding to a few socket plugs keeps "disconnecting".
By doing so it also produce a loud noise (Bang) and sparkle and sometimes smoke, to the "plug" located near the floor, on the shower room.
I first expected overload of devices as this "fuse" in the main box corresponds to like 4-5 plugs in 3 different rooms, and the plug in the shower room. But I have tested with no plugged devices and it seems to be randomly happening.
The "scary" thing is that smoke and noise coming from the "socket plug"...
So I "lowered" the fuse in the main box, and unscrewed the socket plug. It was a bit rusty due to water cleaning (I KNOW!!! terrible, who put a plug there??? it's hard to wash the floor)
Then I decided to "unfix" the socket and I have three "naked" wires, a black, a red, and a copper one. I put transparent "tape" like "scotch" in an attempt to "isolate" them and make them "inactive".
However it still "Blows", "bang" and smoke in that particular socket.
I have no idea what is going on!
Could it be like another device causing that?
Why would it smoke, sparkle, and bang if it is disconnected?
Could it be the fuse in the main box? If so, why does it "bangs" on one socket?
Could it bang there, if the problem is from elsewhere?
Well Many thanks for any attempts to help me!!!
Jean
This is my first post, so I join your community! I will try to detail thoroughly the issue. I have attached pictures!
We have a problem in the flat where the fuse corresponding to a few socket plugs keeps "disconnecting".
By doing so it also produce a loud noise (Bang) and sparkle and sometimes smoke, to the "plug" located near the floor, on the shower room.
I first expected overload of devices as this "fuse" in the main box corresponds to like 4-5 plugs in 3 different rooms, and the plug in the shower room. But I have tested with no plugged devices and it seems to be randomly happening.
The "scary" thing is that smoke and noise coming from the "socket plug"...
So I "lowered" the fuse in the main box, and unscrewed the socket plug. It was a bit rusty due to water cleaning (I KNOW!!! terrible, who put a plug there??? it's hard to wash the floor)
Then I decided to "unfix" the socket and I have three "naked" wires, a black, a red, and a copper one. I put transparent "tape" like "scotch" in an attempt to "isolate" them and make them "inactive".
However it still "Blows", "bang" and smoke in that particular socket.
I have no idea what is going on!
Could it be like another device causing that?
Why would it smoke, sparkle, and bang if it is disconnected?
Could it be the fuse in the main box? If so, why does it "bangs" on one socket?
Could it bang there, if the problem is from elsewhere?
Well Many thanks for any attempts to help me!!!
Jean