Hello all,
Fitted my own alarm system approx 23 years ago, it has worked without issue until last week after a power cut. The back up battery was replaced about 3 years ago for the 4th time. After the power cut the alarm was somewhat sporadic when setting before exiting my house.
The PCB has been damaged as seen on the attached images. I have tried to find a replacement without any luck. Ebay does have a couple but they are used and untested so I do not think they are worth using.
I did try bridging out the tamper and PA circuits, that made no difference. The reed switch on the exit door tests ok, there are 4 PIR`s I did bridge out in turn and they seem to be ok. I assume the burnt PCB is the fault so wonder if anyone is aware of anywhere that has SL Compact PCB`s
Thank you,
Kevin.
Fitted my own alarm system approx 23 years ago, it has worked without issue until last week after a power cut. The back up battery was replaced about 3 years ago for the 4th time. After the power cut the alarm was somewhat sporadic when setting before exiting my house.
The PCB has been damaged as seen on the attached images. I have tried to find a replacement without any luck. Ebay does have a couple but they are used and untested so I do not think they are worth using.
I did try bridging out the tamper and PA circuits, that made no difference. The reed switch on the exit door tests ok, there are 4 PIR`s I did bridge out in turn and they seem to be ok. I assume the burnt PCB is the fault so wonder if anyone is aware of anywhere that has SL Compact PCB`s
Thank you,
Kevin.