Spiro trap mb3 advice

[haza68]

Hi all I'm looking at fitting a Spiro trap mb3 in my system
The problem is I have no room to fit it close to the boiler (old conventional system i.e. gravity feed) I have room on the return pipe in airing cupboard but his is about 3meters or so in pipe length away from boiler will this be ok.

Will do a sludge clean first

Regards

 

[ScottishGasMan]

Yes. Distance isnt really an issue here, as long as its on the direct return to the boiler (so no radiators tee in after allowing sludge direct to teh boiler bypassing the filter)

Leave sensible room under it to empty it aswell