Strange wiring for lighting

Joined
23 Jun 2012
Messages
309
Reaction score
10
Location
Nottingham
Country
United Kingdom
Fitted a PIV system and when it came to wiring it via lighting circuit, I checked two lights and both have one twin and earth cable going to the lights.

The wiring runs via old black conduit to make life more difficult in the loft.

See pic.

Surely there must be some neutral and live loops?? It's a 1960s property.
 

Attachments

  • IMG_20241114_213510.jpg
    IMG_20241114_213510.jpg
    147.4 KB · Views: 10
Sponsored Links
In the 60's it was quite nomal to use junction boxes all over the place and some did the looping at the switches. Have you looked behind the switch yet? The junctions are often within the round conduit boxes.
 
In the 60's it was quite nomal to use junction boxes all over the place and some did the looping at the switches. Have you looked behind the switch yet? The junctions are often within the round conduit boxes.
I've seen one round junction box for the bathroom and it's hard to determine which wire is which.

If looping was done at the switch, how would I get another cable looped in from the switch to the loft without causing destruction (chasing wall)??
 
Sponsored Links
If looping was done at the switch, how would I get another cable looped in from the switch to the loft without causing destruction (chasing wall)??
The wiring runs via old black conduit to make life more difficult in the loft.
Does the conduit not go down to the switches?
Are there any inspection points/draw in boxes in the conduit?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top