Texecom premier elite 48 - urgent help needed - Please.

[sparky999]

Hi mate, in the last few minutes i have finally got somewhere. I decided to reapproach this as a new install. Disconnected wiring except power. Plugged pc into panel and tried connecting via wintex, took alot of attempts but finally connected, so I resent all of the original saved settings back to panel. Reconnected wiring and now I'm back in and can even connect via the app, so happy days. I will now monitor it over the next few days and if i get a repeat i will just change the board over and get a smartcom as its really not worth my time messing with it. I really have no idea what caused it and it has certainly been a new experience after all these years. Learning never stops.
Thanks for all your input and i did try 5678 but no go.

Will update post if anything changes and it may help anyone else who ever has a similar issue in the future.

 

[sparkymarka]

My thought was looking back on thread ….you had logged on via wintex when you added that extra code and it had loaded the default codes , I’ve had it before where you have to upload the settings twice ( you can normally tell by how long it takes to upload )
I would flash the panel and fit a smartcom

 

[sparky999]

Hi, yes, but still doesn't explain why all was ok for a few days after adding the code. I would expect it to not work straight away. Suppose we will never know.
Cheers.