Upvc hinge adjustment
- Thread starter RobH71
- Start date
Look at the 2 allen headed screws in the centre, the left one will have an arrow on it pointing left and right, lock and unlock, loosen that by half a turn then turn the other one left or right and watch the door move sideways, once in desired position then lock the first screw back off. You can manipulate the door up by adjusting the top hinge to the right and the bottom one over to the left, this will cock the door over but all depends on the gaps down each side as these will change too.
If you need just straight forward up and down adjustment then adjust the back allen bolt on the frame portion of the hinge, screwing it down pushes the hinge and door up
If you need just straight forward up and down adjustment then adjust the back allen bolt on the frame portion of the hinge, screwing it down pushes the hinge and door up
As explained in my post above the back screw lifts the door up and the front one alters the compression, it's in the video too, did you watch the video?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local