My central heating is working ok but the hot taps have gradually over about the last year become colder ,last week the central heating would not fire up due to low pressure so i represurised the system but since then the taps are refusing to run hot,they will sometimes start hot for about five seconds then revert to running almost cold.i have tried the flow rate adjuster ,Grey knob in pic 2 , all positions but no change.
upon seeing this next picture i noticed that the clear pipe was off ,i pushed it back on the tube but no diferance was made to the tap temperature.
the temp adjuster dial has had a slight leak for years, acasionally a slight drip.
Is there a simple fix for the taps not runing hot or do i need an expert , I suspect the latter.
upon seeing this next picture i noticed that the clear pipe was off ,i pushed it back on the tube but no diferance was made to the tap temperature.
the temp adjuster dial has had a slight leak for years, acasionally a slight drip.
Is there a simple fix for the taps not runing hot or do i need an expert , I suspect the latter.