VCW 242 EH Diverter question?

[paddy69]

Thanks Guys!
Yes, have the manual for the settings.
Problem sorted!
The water section pin was pushing the cam enough to trip the microswitch. But on closer inspection today I saw it was not pushing it any further. The workings of the servo valve obviously need pushing a bit further to direct the water in the right direction to the diverter valve.Stripped water section down, hole in diaphragm!!! Had a second hand section lying around, so robbed the diaphragm off that. Will do until the new one arrives.

 

[AGAS]

should have read it properly i thought you checked the diaphragm ( the obvious ) first . . something to keep in mind you must change the washers when stripping the diverter because they leak for future reference .

 

[paddy69]

I changed the diverter diaphragm! Hadn't been into the water section!

 

[Gasguru]

Get the stuffing box (gland seal) too....screws into the top of the water section.