Vokera linea 24 - Hot water yes - CH no

[GeorgeRJC]

Hi all,

Its that time of year again for the ch to get flashed up, however
my Combi boiler will not ignite for central heating. When demanding hot
water from the tap it fires up ok. Have read the user guide and all visual
indications are correct. No fault code showing, current presure reading is a fraction below 1.5 bar.

Does anyone have any ideas

Rgds

George

 

[kevplumb]

diverter valve stuck?

 

[Bahco]

Have you turned up the room stat , timer functioning correctly

 

[GeorgeRJC]

Hi guys,

Cheers for the replys, Had a look at the divertor valve with manufactures
manual in hand but looking inside a bit on the technical side. I operarte the boiler for the central heating via a digital box and that seems to be working ok. When i switch on at the box the other box sited with the boiler that is wired into it lights up showing that its got the info from the digital box that i want to switch on. Any other basic ideas that i may have missed before i dip into the old bank balance and get someone out

Cheers

George

That hacked off that i'm just about to crack a can of beer. Why can't it be something like the Kettle that goes TU!

 

[kevplumb]

if the hot water side is working ok would suggest timer probs if you have mi put the link back thats there if no clock fitted

 

[weargas]

turn the selector switch to off (centre position) Is the green power light still on? your switch has snapped behind the control panel then.
If the lights go out then it's more likely to be external controls.

 

[GeorgeRJC]

Hi All,



Prob now solved, thanks for all replys, "Weargas" owe you a beer mate.

rgds

George