I have been having to repressurise my baxi combi 80E boiler when its stone cold every morning for a few weeks now. As the pressure is is down to zero. I refill to 1bar. And it stays at 1bar for hours later before putting heating on. needle rises to a steady 2bar. And drops out a small drip from pressure relief outlet on other side of wall. The expansion vessel was repressurised to 1bar during its service about 4 weeks ago and found to be in good condition with no rupture. I've had enginneers out since to try to find out why pressure keeps dropping explaining and showing the small drip from outlet on outside wall. But they keep trying to tell me that i must have a leak somewhere possibly under floor. I would have thought it would make more sense if they would at least change the prv first before having to go down the route of ripping up carpets and floor boards. Strangest thing though! is some mornings now i'm finding i've still got water in there and either don't have to top it up or have to top it up a little. Anybody know whats going on? Thanks.