Wiring a Wireless thermostat to baxi solo 3 boiler Helpplea

[stevebty]

Hi im in need of some help.

I have a baxi solo 3 pfl boiler and a new cmt727s1106 honeywell room thermostat.

My old timer is broke (randall 103) i decided to purchase the new honeywell timer.

But im stuck on the wireing can anyone give me any advice on wiring it.

in the boiler the old timer was wired into L N E S/L

Any advice is welcomed thank you

 

[DeltaT2]

Have you not got any other controls on your central heating system mate?

 

[stevebty]

this is the system i got http://theinitiativegroup.org.uk/fscinitiativedatabase/Baxi/BaxiSoloPFLSystem.pdf

Only thing i can do is get power to the boiler but not get it to ignight the burner

 

[DeltaT2]

OK but do you have a hot water cylinder, motorized valves & cylinder thermostat also? Where it say 'External controls' can be a Y or S plan etc.

How your hot water temperature controlled?

 

[stevebty]

I have a seperate boiler downstairs for the hot water supply for all taps around the house.

The boiler for the radiators which located upstairs is fed by a small water tank in the loft (small plastic one) and next tthe tank is a water pump. Hope this helps

 

[ServiceNumpty]

You're not confusing the 'boiler downstairs' as your copper hot water CYLINDER are you.

 

[stevebty]

i think i am.

I think i have just wired it correctly as it seems to be working ok now.
Just need some help comfirming its wired correctly

http://www.honeywelluk.com/Documents/Full-Install/pdf/1066.pdf

Wireless reciever
Mains N to N connection to Boiler N
Mains L to L Connection to Boiler L and Connection A
B Connection to Switch L

Everything powers up fine now with this connection.

Should the boiler On light be on all the time or shall i connect it to B connection along with Switch L so when i turn the controller on to turn the heating on it turns the boiler on and starts heating too.

Hopefully ive not made it too confussing

 

[picasso]

so whats controlling your hot water cylinder ?