Worcester greenstar 30si boiler

[Dan Robinson]

Gas is turned on. Looks like it is engineer time.

 

[AGAS]

I've recently moved into a property and have encountered problems with the gas supply.

what about your pressure on boiler , dial on front of boiler .

is blue light normally on ( slow flash ) or normally off ( slow flash ) ?

 

[terryplumb]

what is water pressure ?

 

[Alex Dickinson]

The water pressure was near red so I bled the radiators until it got to 1.5. It stays on 2 until you turn it on and it drops to 1.5 the blue light flashes every 3 seconds when it's on

 

[AGAS]

engineer time my dear chap ?

 

[Alex Dickinson]

I've asked around. Probably won't go with British gas call out, stupid prices but I've got an idea of what I can mention if I can get hold of anyone

 

[AGAS]

I've asked around. Probably won't go with British gas call out, stupid prices but I've got an idea of what I can mention if I can get hold of anyone

your blue light every 3 seconds won't help

fault code -is blue light normally on ( slow flash )flashes off - or - normally off ( slow flash ) flashes on? + reset flash as mentioned

tell him that fault code and you'll have to give the call out and take it on the chin , thats as much you can say apart from what you've already said

 

[terryplumb]

just re read your original post ,you said when you press re set button it does not respond. are you pressing and keep it pressed for 3 seconds. its the top button to left of pressure gauge .

 

[AGAS]

just re read your original post ,you said when you press re set button it does not respond. are you pressing and keep it pressed for 3 seconds. its the top button to left of pressure gauge .

shame he missed your post terry , i bet he will be on in the morning

 

[Alex Dickinson]

Yes I've tried pressing the reset button and holding it down but it just keeps flashing

 

[Alex Dickinson]

I've tried to reset it after a day of it being unplugged and it resets but then goes back to the flashing

 

[picasso]

If its been standing for a while probably pump stuck.

 

[terryplumb]

Alex , after you press /hold the re set button, are you now saying the boiler does actually re set ,and does it try to ignite ,and then locks out again ?

 

[terryplumb]

Alex , after you press /hold the re set button, are you now saying the boiler tries to ignite ( you should hear noises like pump /fan ) and shortly after goes into reset mode ? sorry got distracted !!!

 

[Alex Dickinson]

Yes. I left it unplugged for the day. Put the plug back in it attempted to start (plug/fan noises) then went into reset mode (slow blue flashing light + fast red reset light) I pressed the reset button for 3 seconds all the lights came on/fan noises then it went back into the same flashing lights (fault code)