New profile posts

Install 6mm 3core SWA into the junction box.

From your consumer unit breaker no.3 install 6mm twin and earth, connect this to the junction box of with the swa.

The sheathing of the swa and the yellow core of the swa should be connected to the earth in the twin and earth cable (the yellow core is now your earth for the man cave).Replace no.3 breaker for a 45 amp breaker.
Can't work out how to send you a pm.

Anyway so as not to give the electrician girls on the site a chance to complain I've messaged you here.

You will want to install 6mm cable for what you want. I would do the following:

Remove the isolator box and replace with just a standard junction box.



.
Hello guys.
We have Baxi Bermuda back boiler and from few day when fireing up CH or HW there is metalic knocking noise like on the metal sheet for about 1-2 min then stops and same again when fireing back, I have took fireplace cover off and can tell it's coming from heat exchanger, any help would be much appreciated.
Hi burnerman, im sure you hepled resolve my last problem with my power washer hopefully i can rely on your knowledge again
i cant find the following help in the manual ,my JCBSPPW4 power washer works fine until i try to use power rinse the the power reduces to a flow , iv tried my spare gun but it does exactly the same thing foam works , rinse works but as soon as i go to full power rinse pressure just drops .
An Aquastream Aqualisa shower. Water started pouring from bottom of the Unit. Any ideas in the matter, thanks !!
Hi Michael By all means replace the bearings on your motor if they are noisy. 6202 is the usual size, ZZ for quality sealing. John
Hi Burnerman, i have a noisy fan on a danesmoor 15/19
oil boiler, can you replace the bearing or do i need a new motor ?
Hi - what rainwater harvesting tank do you have and from where? I'm looking for 5,000 litres plus for use only in my garden. Any tips on what to do or not do or get / not get? Thanks.
Hello, I've recently moved in to a house that has an c001-102 intellisense panel by the front door, I've opened it and the tamper thing is now on eternally, I have removed the 12v supply to stop the noise but was wondering if there is a code to reset the whole thing as no-one left any codes to enable me to use the alarm. I am sorry to bother you, but any help would be gratefully received. Cheers Carl
Hi. Presumably you think that fan I posted about is excessive then judging by your response? On what basis do you think that? (I have no clue about fans just that it’s loud - want to gather as much intel as I can) thanks
Back
Top