Bahco SB-3753N Series Centre Punch made from vanadium steel with a hexagonal shank. With fully polished steel surfaces and a brilliant chrome finish.Size: 8mm (5/16 in).Length: 150mm (6 in).Additional Information:L...

This Bahco Taper Saw File has a triangular shape, with edges tapering towards the point. The surfaces and edges are single cut. Ideal for sharpening saws with universal teething and teeth at a 60° angle. Available only in second...

Bahco SB-3734N Series Parallel Pin Punch made from vanadium extra steel. With a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish.Length: 150mm (6 in).Size: 6mm (1/4 in).Additional Information:...

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel...

Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, trip...

Series 038 flared and slotted through shank screwdriver with the following features: The striking metal cap at the top of the handle gives ultimate protection during jobs requiring high impact and added force. The trough shank continues thr...

The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from h...

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both s...

Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 2 smoot...

For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing.