The 0° to 90° Grey Double Socket 110mm Soil Pipe Adjustable Bend has a double socket and allows you to adjust the bend angle from 0° to 90° to suit a situation when a standard fixed angle bend will not form the desired angle.

The 136mm Black PVCu Underground Flexible Adaptor is used to connect two pipes of varying outside diameters. The smaller end will accommodate pipes from 100mm outside diameter up to 115mm whilst the larger end will accommodate pipes from 121mm outside...

The 110mm Terracotta Socket Plug is used as a temporary blanking plug for future pipework installations. The plug is compatible with all FloPlast socketed pipes and fittings.

The 87.5° Terracotta Double Socket/Spigot 110mm Underground Drainage Equal Junction allows the connection of underground pipes at an angle of 87.5°.This push-fit junction has a spigot at one end which should be installed in the direction of flow within...

The Black Drain Adaptor to Connect 32mm 40mm and 50mm Waste Pipes directly to a surface water drain or depending on the design via a gully trap to the underground drainage system. The adaptor push-fits in to the gully pipe fitting and has markings to...

The 45° Terracotta Socket 110mm Universal Gully Trap is designed to form a water seal between the drainage system and open ends on the system to avoid unwanted smells. This includes open ends such as hoppers. The hoppers are sold separately and can either...

Rainwater harvesting works by taking the rain from roofs and filtering out leaves and debris before storing the water underground in the main storage tank. The water is then pumped into the property to be used for non-drinking applications e.g. flushing...

The 32mm Black Boss Pipe Rubber Adaptor push-fits into the bosses on FloPlast ranges of branch access pipe and strap bosses to allow 32mm waste pipes to be connected to the soil stacks system. Suitable for use with both 32mm solvent weld ABS and push-fit...

To reduce the risk of cross-connection and contamination it is essential that the reused water pipework is readily distinguishable from other pipework. FloPlast offer an Identification tape and labels pack to ensure your system is correctly labelled and...

Rainwater harvesting works by taking the rain from roofs and filtering out leaves and debris before storing the water underground in the main storage tank. The water is then pumped into the property to be used for non-drinking applications e.g. flushing...