This headset cup removal tool allows for the quick, easy and safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the cup allowing for a simple hammer blow to remove...

Designed to remove and refit both Schrader and Presta type valve cores, this tool is a must when adding tyre sealant, fitting a Presta valve extender or replacing a valve core. Despite its small diameter, the knurled finish provides the grip needed to...

Allows for the quick and easy installation of headset cups and press fit bottom brackets, without risking any damage to the frame. The stepped cup guides ensure the cups are correctly supported and sitting straight when being pressed into the frame. The...

Tube cutter for fork steerer tubes, handlebars, seat posts, or any round tubing up to 31.75mm (1 1/4") diameter, this tool ensures a professional and accurate cut every time. The internal contact points on the guide are non-scratching nylon and support...

Misaligned frame and fork dropouts cause many ride problems, including bent axles or quick-release skewers, together with tracking and gear shifting issues, due to the wheels not being able to fit correctly. This tool helps to identify if the dropouts...

Used to install or remove bearing bottom brackets on the majority of bikes fitted with 16-notch external bearing threaded cups. The splines engage securely onto the bottom bracket notches allowing for easy removal or tightening of the cups, without the...

This crank extractor is used for the correct removal of crank arms and chainsets that use a square-tapered, or splined ISIS Drive, bottom bracket. The threaded collar screws into the crank arm before the drive bolt gently forces the bottom bracket axle...

A must for the keen home mechanic or workshop this truing stand holds the wheel firmly, allowing for free movement and adjustment. Designed to fit hubs with diameters of 100mm and 135mm, which are then held in place using the wheels usual fixings. It...

Required for tightening or loosening spoke nipples, a spoke wrench allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true. This wrench fits 8 different sized spoke nipples and is ideal for both the keen home...

Recommended for use when lacing spokes into a bicycle wheel, this spoke nipple driver allows for nipples to be fitted and tightened through the wheel rim at speed due to its clever cranked design. The head of the driver features a tab to fit into the...