Trend Snappy Quick Chuck - With 3/8in hex Shank The heart of the Trend Snappy System, the chuck takes all of the Snappy accessories for quick swapping between tasks and applications. Fits into a standard 3 jaw drill/driver chuck to convert it t...

For use with user made router tables, saw benches and band saws. Heavy duty with adjustable stops at -45 degree, 90 degree and +45 degree. Scale pitch of 5 degree. Protractor body 142mm x 48mm high with metal bar 300mm x 17mm. Spring ...

Rigid plastic safety pushstick for guiding small sections of timber over a router or table saw. Keeps operators hands away from the cutting tool. Pushstick must be used when making any cut of less than 300mm in length, or when feeding the last...

Back fence complete for incorporation into user made router tables. Sliding cheeks to reduce cutter aperture size. With edge planing facility of 1.4mm and 2.4mm. Comes with a top featherboard pressure and a clear safety guard. Supplied w...

The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-sit...

A versatile no volt release switch whose main function is the remote switching of power tools such as routers when mounted in a router table. The plug-in no volt release switch can be placed in a convenient position on the table. Trips power t...

This teardrop shaped base is fitted to the router and allows better control when edge moulding, by preventing router tilt. Large knob for greater control. Pre-drilled for Trend, Elu and DeWalt routers. Can be re-drilled by user to suit ot...

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height. They are especially useful for accurate work such as when the router is held inverted in a router table. Suitable for the following TREN...

A jig to rout out apertures, recesses and radii in work tops to fit a range of sinks and hobs, and to suit curved cabinets. Will cut both an internal and external radiius with the use of either pins or engraved sight lines. Made from 12mm hardw...

A unique concept which allows oval pockets to be routed, to disguise ugly resin pockets and knots in timber. This is especially required when softwoods are being used. Can be udes to repair blown worktop joints when care is used to ensure the...