TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Specifications: • Shank Diameter: 1/4 hexmm • Dia Metric: 7...

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as ...

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long lif...

Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. Spe...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 13 &...

Threaded inserts for fixings in plastic. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. M6 inserts have slot on base and M8 inserts h...

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit i...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be le...

Craft Pro Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. Precision ground with two cutting edges and reversible for extended life. Two cutting edges and are reversible for twice the life ...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw...