|
Trend Replacement Bearing 5/8" 5/32" 3/8"
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw... |
£16.95 More Information |
|
Trend CRAFTPRO Rounding Over Router Cutter 22.2mm 15mm 1/4"
For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metric: 15 • Cut Length Imperial: 1... |
£28.95 More Information |
|
Trend Cove Bearing Guided Router Cutter 28.5mm 14mm 1/4"
The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 14 • Overall Length Metric... |
£72.95 More Information |
|
Trend Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2"
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy p... |
£87.95 More Information |
|
Trend T101BR Jigsaw Blade Downcut for Worktops Pack of 5
Trend Professional Jigsaw Blade - Down cut for fine finish, pack of 5 100mm long blade with 10TPI (Teeth Per Inch) down cut profile for fine cuts on timber and sheet materials. Suitable for materials from 4mm to 30mm thick, ideal for crosscutti... |
£10.95 More Information |
|
Trend Ball Groover 1/2" Shank Router Cutter 12.7mm
Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Di... |
£59.95 More Information |
|
Trend Replacement Bearing 14mm 5mm 3/16"
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw... |
£16.95 More Information |
|
Trend Slotter Blade for 1/4 Bore Arbor 40mm 5mm 1/4"
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. Specifications: • Dia Metric: 40 • Sawb... |
£40.95 More Information |
|
Trend Bearing Guided Housing Router Cutter 38.1mm 16mm 1/4"
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia Imperial: 1 1/2 • Cut Length Metric... |
£81.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 8mm 19mm 1/4"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Dia Imperial: 5/16 • ... |
£32.95 More Information |