|
Trend Slotter Blade for 12MM Bore 33/1 Arbor 86mm 2mm 12mm
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Requires heavy duty arbor accessory. Recommended used in a fixed head router at 12,000 rpm. ... |
£88.95 More Information |
|
Trend Replacement Bearing 34.9mm 7/16" 1/2"
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw... |
£20.95 More Information |
|
Trend Snappy TCT Drill Countersinks Size 6
Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 6 gauge. The perfect, fast swap accessory for clean, consistent finishes." TCT cutting tips f... |
£18.95 More Information |
|
Trend CRAFTPRO Wood Cutting Saw Blade 190mm 40T 16mm
A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to sp... |
£26.95 More Information |
|
Trend CRAFTPRO Single Flute Router Cutter 6.3mm 12.7mm 1/4"
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. Specifications:... |
£13.95 More Information |
|
Trend CRAFTPRO Bead Ovolo Router Cutter 4mm 12.7mm 1/4"
This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28.7 • Cut Length Metric: 12.7 &bull... |
£44.95 More Information |
|
Trend Threaded Slotter Blade for 33 Series M12 Arbors 50mm 2mm M12 Thread
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 2 • Saw Teeth: 4... |
£82.95 More Information |
|
Trend WS Saw Tooth Forstner Drill Bit 1" 1/4" 1/2"
Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as ... |
£47.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 18mm 25mm 1/4"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 &... |
£49.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 3.2mm 11mm 1/2"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 3.2 • Dia Imperial: 1/8 •... |
£26.95 More Information |