Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as ...

Trend Location Pins - For Trend KWJ700 and KWJ900 Worktop Jigs. Pack of 4. Set of four accurately machined replacement plastic location pins for the Trend KWJ700 and KWJ900 jigs. Replacement pins to ensure the Trend Jigs continue offering profe...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for s...

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut...

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with eac...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter:...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 8 mm • Dia Metric: 2 • Dia Imperial: 5/64 •...

Strip is fitted into the door frame rebate (head and jambs) as three cut pieces forming a compression or wiping seal. The seal is butt joined at the corners. To seal the door bottom, a weather bar is mounted into the threshold section. It...

Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. Spe...

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long lif...