Trend Trend 866X1/2TC Finger Jointer
Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. D 40 mm B 28 mm E 6.0 mm OL 96 mm Shank Diameter 1/2... |
£124.96 More Information |
|
Trend Trend C214X1/2TC Bearing Guided 3 Degrees Undercut 50mm Cut
3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. D 24.2 mm C 50 mm A 93 degrees Shank Diameter 1/2 inch |
£85.03 More Information |
|
Trend Trend C021AX1/4TC 12.55 x 25.4mm Two Flute Straight Cutter
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 1/2 inch D 12.55 mm C 1 inch C 25.4 mm OL 66 mm Shank Diameter 1/4 inch |
£19.93 More Information |
|
Trend Trend C210Ax1/4tc Weatherseal Groover
Two fluted tungsten carbide weatherseal groover for use on natural timbers and man made boards. D 34 mm C 2 mm OL 54.5 mm B 20 mm Shank Diameter 1/4 inch |
£52.49 More Information |
|
Trend Trend C127X1/4TC Rounding Over 6.3mm Radius X 15.9mm Cut
For producing ovolo and rounding over edge moulds, using a side fence or back fence. D 5/8 inch D 15.9 mm C 13.5 mm R 6.3 mm Overall length 57 mm Shank Diameter 1/4 inch |
£26.23 More Information |
|
Trend Trend C179X1/2TC Dovetail Cutter 19.1mm x 97° x 25mm cut
These cutters are for Trend Craft Dovetail Jigs. D 19.1 mm C 25 mm OL 65 mm A 97 degrees Shank Diameter 1/2 inch |
£33.59 More Information |
|
Trend Trend SET/MT1X1/4TC Imperial Mortise & Tenon Cutter Set
A set of five long reach straight cutters with diameters of 1/4 inch to 5/8 inch suitable for use with the Trend MT/JIG Mortise and Tenon Jig. This set includes: 1 x C008X1/4TC - Straight 6.35mm dia x 25.4mm cut 1 x C012X1/4TC - Straight 7.9mm dia... |
£82.93 More Information |
|
Trend Trend UNI/PIN/1 Unibase Line Up Pin
Replacement line-up pin for the UNIBASE. |
£4.19 More Information |
|
Trend Trend C197X1/2TC 45° Bearing Guided Chamfer
Self-guiding chamfer/bevel cutter. D 51 mm C 19 mm B 12.7 mm A 45 degrees Overall length 72.5 mm Shank Diameter 1/2 inch For stationary machines - Max 18,000rpm |
£57.73 More Information |
|
Trend Trend FIX/KIT/3 Unibase Fixing Kit
For fitting routers to self-made router tables & accessories. |
£5.24 More Information |