|
Machine Mart Xtra Power-Tec - Telescopic Tram Gauge
This telescopic tram gauge is great for point to point measuring and gives a constant reading in any position. Extendable to up to three metres, this is great for a wide range of applications in a variety of areas of differing proportions and produces... |
£479.00 More Information |
|
Power-Tec Power-Tec - Large Arch Hook
Ideal for repairing dents in wheel arches on larger vehicles, this large arch hook simply hooks under the wheel arch, allowing for pulls without the risk of bulging or mis-shaping the wheel arch. Featuring two different pulling faces, offering a choice... |
£62.98 More Information |
|
Machine Mart Xtra Power-Tec - 2 Ton x 1.45 Metre Strap
Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 50mm wide and 1.45 metres long, this high performance strap with 8 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior... |
£39.98 More Information |
|
Power-Tec Power-Tec - Pinza Clamp
A 45mm deep Pinza Clamp from Power-tec with a 50mm wide jaw, allowing the clamp to be used over flanges and deep onto the panel for a sure, non slip grip. Boasting 6 ton in-line capacity and 2 ton right angle capacity. |
£204.00 More Information |
|
Power-Tec Power-Tec - Multi Hole Pull Plate
This handy multi hole pull plate from Power-Tec is suitable for a range of dent pulling applications in the automotive repair industry. Simple to use, the plate can be bolted onto a chassis or bodywork panel to allow for a quick, simple repair. |
£64.99 More Information |
|
Machine Mart Xtra Power-Tec - Tight Opening Clamp
Ideal for use in hard to pull areas, the tight opening clamp from Power-Tec features a 38mm wide jaw and has a maximum pulling capacity of 3 tons, making it perfect for pulling applications involving areas such as chassis ends, supports and light openings. |
£82.99 More Information |
|
Machine Mart Xtra Power-Tec - G Clamp
This 100mm G Clamp from Power-Tec allows for dent pulling at various angles. The clamp allows for 4 ton pulls, while the 100mm opening means the clamp can operate around, over or behind damage with ease. |
£184.00 More Information |
|
Power-Tec Power-Tec - CamLok Clamp
With 125mm x 65mm reach, 6 ton pulling capacity and a slim clamp leg for working over various obstacles that can be faced during automotive bodywork pulling applications, the CamLok clamp from Power-Tec is ideal for pulling work on vehicle chassis and... |
£519.00 More Information |
|
Machine Mart Xtra Power-Tec - Down Pulley
Compatible with all types of jigs and pullers, this clever little device is used to convert direct pulls into a downward pull with minimum effort and fuss. |
£255.00 More Information |
|
Power-Tec Power-Tec - 45mm Pull Clamp
Tough, durable and useful 45mm Pull Clamp from Power-Tec, great for various pulling applications. With 5 ton pull capacity and pull yoke. |
£84.98 More Information |