texecom

Hi, I have just moved into a new property that has a Texecom Premier 24 system throughout. When I was scanning through the control panel and seeing the status of each zone, it tells me that the front door DC is "active". The front door is locked. So I decided to have a look at the door and...

Hi guys, I have recently purchased and set-up a SmartCom box. The installation went smoothly and I used to extra com port they provide so I am still able to use my GSM device for notifications. The issues I am having arrise from the actual app itself. For example, when I arm the system from...

Hi, I have been gaining much valuable help reading this forum over the past months, enough to get my new premier 48w system up and running. I have the system installed and working with ricochet PIRs and 3 wired door contacts with tamper all daisy chained up in a loop. I wanted to add one pir...

Hi All I have installed my Premier 64w-Live panel and richochet devices, including door contacts and PIRs. Everything is working as I want it, apart from: I would like to have three set modes - 1. Full - This is for when we are out of the house. All PIRs and Door contacts set to Guard...

Hi there my first post, hope someone can be kind enough to help. I installed an elite 64 and had/have it all working, with a SmartCom, connect app, and wintex etc. I then setup a new PC and want to move wintex to this new machine, but, i seem unable to get wintex on the new machine to connect...

I have a texecom premier 48 (older panel) I installed a while back but cannot get it to finish arming and never have managed it... It just keeps buzzing and claiming it will arm but never does, until cancelled with the user password. I can't see anything obvious in my settings that would cause...

Hi all, ... First post, just want to start with some appreciation for all the information already on this forum. I have used it to setup my Premier Elite system from scratch with no alarm experience. just being a qualified electrician. I do however have 2 questions: - I have a Ricochet PA...

Hi all I recently installed a texecom alarm system to my property with a smartcom box all seems to be working correctly apart from a constant green flashing light on main panel, I did reset the panel from box but everything works as it should,any ideas to why this green light is flashing would...

Hi there wonder if anyone can help. Recently had installed a Pyronix Enforcer kit with a Deltabell X Grade 3 which was working fine. The enforcer became faulty after 9 months so I replaced it with a Texecom 64W being the hard wired keypad still keeping the Deltabell X. The alarm was fitted by a...

Hello all, Thanks for reading this post. I had a new alarm fitted to my house last week. I currently have an expensive ornament and before I seek another professional to get it sorted I am wondering if I can get it sorted myself. I am a fairly technical person and class myself as a fairly...

Hi folks, this is my first post so please be gentle with me. I have tried to install a Texecom Premier Elite 64-M (Wireless) including a Texecom Connect SmartCom and Texecom SmartKey. I've managed to get the system working to some extent but i'm having problems setting up the SmartKey. All...

Hi folks Had a nightmare 24hrs with wintex corrupting settings on elite 24 panel via smartcom, gave a com1 error. Quite possibly user error, as after setting up the smartcom, I did not pull a fresh config from the panel, instead was editing a previous version prior to installing the smartcom so...

We've just moved into a house that has a professionally installed Texecom Premier 24. Other than a recent battery fault (which seems like I should be able to sort out) it works well with PIRs in 4 rooms several door entry sensors and 2 fire alarms. I'm quite taken with the idea of the Texecom...

Hi Guys Im hoping someone can assist. I have today added the smartcom connect to my prem elite 64 system. Its all set up, connecting, app is set up and seems to be functioning as normal, alerts coming through as expected etc. My one issue is I cant arm or part arm from the app. Im now losing...

Hi, With a bit of help from the forum, I have my Elite 24 up and running :-). My job for today was to add the Smartcomm module and 32XP-W. The former has gone ok, but I'm stuck at the latter. The panel recognises the expansion module, however, when it searches for the wireless PIR (sitting...

Hi, With a little help. I've almost completed my DIY swap over of a gardtec to a premier elite 24. I have two head scratchers left. Here is the first one... All of the devices are finally shown as secure :-). With the exception of the door contacts, which are "entry/exit", all are set to...

Hello, Is there an option or zone type to monitor a door using magnetic contact as follows: no PIN codes to be used. no arming or disarming to be done. and whenever the door is open the internal sounder keeps chiming or quacking, and once the door is closed the sound is stopped...

Hi. I know that there seasoned installers are probably flicking their eyes to the ceiling at a novis posting questions about such things. I have installed a Texecom premier elite 24 control panel with a wired 8 zone expander + a ricochet 8 zone expander. The other PIR's go to the elite 24...

Hello all, I currently have a wired alarm system that I want to replace with a hybrid system. The current system is not user friendly and there are no window contacts. My main aim is to have a secure system which I can control via an app. I received the following quote from an engineer for a...

hello All, hoping for some help, trying to connect to a elite 48, software versions 4.01, trying to connect to wintex 3.5.6 but get the error connection to the panel could not be established, the LED on the usb lead is flashing red when trying to connect