I found and cleaned/dried the 'hidden' pump compartment and everything worked well for a few months, but it again needed to be dried. I left the cover off as the drier worked without it and it was a pain to remove.
The compartment contains about 1cm of water level when the drier is shut down by the "Container Full" alarm and the problem has now got to the point where the drier stops when the empty compartment fills to that level with condensed water.
Manually adding more water to the compartment causes the pump to operate when re-starting the drier to reduce the water level back to 1cm, with the drier stopping soon after.
So - the pump and its level control switches appear to work - perhaps it is just an additional high-level protection switch that is failing. Any suggestions?
Hi,
I am trying to get to the secret flap. I understand where it is likely to be but I am stuck at the first hurdle as when I pull down the white flap on the very fron of the machine to access the condenser to remove it, all I have is a grey panel with no screws or any signs at all hoe I can get it out (to even get close to the secret door).
Could someone help ?
I have been on you tube and watched people cleaning out the secret flap but everyone I watched had either clips or twist hinges to move to pull out the condenser. I don't have that at all.
Hellllllllllllpppppppp meeeeeee !!!!!
At last I feel sane again,many many thanks
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local