Fixing to this high plasterboard wall

Joined
22 Nov 2018
Messages
1,764
Reaction score
30
Country
United Kingdom
The walls hollow so I guess plasterboard. Can't find studs with magnets or stud finder but kitchen units are going up on it. What fixings? Gonna be heavy. Do the hooks go onto these plates in picture?

For loft can I cram down the insulation and cut osb to GP on top? What's all covered
20241222_181322.jpg
20241222_175017.jpg
20241222_174902.jpg
TACH]
20241222_174834.jpg
20241222_182429.jpg
20241222_182403.jpg
 

Attachments

  • 20241222_174827.jpg
    20241222_174827.jpg
    199.8 KB · Views: 7
Sponsored Links
Don't fix cabinets to plasterboard, it will fail.
You must find solid stuff (bricks behind dot & dab or studs.
Worse case you need to cut a bit of plasterboard, insert tape measure and see where studs are or go deep enough if dot & dab
 
The brackets on the third pic are the ones that hold the cupboards to the wall.
If the new units are going to sit on top of the existing ones then hollow wall fixings will be fine - so long as all is good on the ones below. Do find out how they are fastened though!
John :)
 
The walls hollow so I guess plasterboard
Remove a 100mm+ high strip of plasterboard and replace with ply at the height that will carry the fixings

. Do the hooks go onto these plates in picture?
View attachment 366882
Yes but that's the wrong way round. You'll screw that bracket to the wall through the preformed holes so it will end up that the side your thumb is touching is what is against the back board of the cabinet

For loft can I cram down the insulation and cut osb to GP on top?
Dunno what GP is, maybe "go"?

No, you can't compress insulation, because it diminishes its effectiveness. You ought to be striving for 270 mm of wool up there, not compressed. Compressing insulation too much can also have a detrimental effect on your ceiling plasterboards. Consider loft legs or thickening the joists to get a void of 270mm+
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top