INSPECTIONS

[kevplumb]

aye and we all know out of which orifice (as usual)

 

[Bamber gaspipe]

 

[BOB.DOLE]

ok here we go you fire up the burner and you put in the flue gas analyser and take the readings, if they are not right you can ajust the burner pressur on the gas valve and also ajust the air/ gas ratio flap on the side

 

[Bamber gaspipe]

You have to love this guy....

i dont know if you have noticed but women in perticulair have changed in the last 90 years their tongue,s have evolved to speak back with a nagging tone, i have calculated at this rate of evolution of 130 years on the tone will have developed into a barking tone much like a dog wining.

One of Bobs Gems...

 

[kevplumb]

1 its on the front

2 where do you set it in the first place to fire the burner

3 how do you test the aps

4 min gas pressure (working) is ??

5 when do you test the flue draught ??

 

[BOB.DOLE]

1 its on the front

2 where do you set it in the first place to fire the burner

3 how do you test the aps

4 min gas pressure (working) is ??

5 when do you test the flue draught ??

just a min kevy dont get to carried away with your nuts its my turn for a question

are you fimiliar with a remeha 2000/3000/6000/series.

 

[kevplumb]

no

 

[BOB.DOLE]

no

ooops what a shame, never mind

 

[kevplumb]

HA HA HA

must try harder

 

[Bamber gaspipe]

Not familiar with either...you haven`t answered Kev`s question though Bob.....please blow me away.....

 

[BOB.DOLE]

HA HA HA

must try harder

do you have one on riello

 

[kevplumb]

yup

 

[doitall]

Is that a Riello.

 

[BOB.DOLE]

Not familiar with either...you haven`t answered Kev`s question though Bob.....please blow me away.....

not worked on them for about 6 years but they are very easy and not rocket sciance.

 

[kevplumb]

hey john which museum did yer get that oiler out of