in my case theres a need to keep the temp above about 3degrees to preserve the glues and anything else thats frost sensitive
even at 2.6w the fan heater takes the best part of 30 mins to raise the temperature from 3 to 10 or 11 degrees
i am sure with insulation a "tube" heater would keep the chill off not to shure if its up to the job without insulation!!!!
all depends on size how leaky and how well insulated
even at 2.6w the fan heater takes the best part of 30 mins to raise the temperature from 3 to 10 or 11 degrees
i am sure with insulation a "tube" heater would keep the chill off not to shure if its up to the job without insulation!!!!
all depends on size how leaky and how well insulated
