Scudo (Expert/Dispatch) Rear Shoe Auto Adjuster Questions?

[ReganAndCarter]

I think most makes of brake shoes would be just fine on this van......they last for ages!

You're not wrong there. Had the van over 17 years and this is the first time I'm changing them. Admittedly I haven't put big miles on it.

 

[ReganAndCarter]

Can I canvas opinions on what you do about some sort of lubrication on the backplate where the shoes come into contact with it. See varying opinions, mainly -

1) No lubricant - just clean up/wire brush
2) Slight smear of copper grease
3) Anti-seize smear

On the anti seize I'm not sure which one you would use but saw a video of someone putting a smear of a white anti-seize on the contact surfaces of back plate. He said he didn't use copper grease because all the brake dust would just stick to it and clog it up. Wondering what this magic anti-seize is that doesn't attract brake dust?

EDIT

Maybe the white anti-seize I saw was this aluminium one that's copper free?

Sealey SCS103 Aluminium Anti-Seize Compound 500g Tin | Euro Car Parts

Sealey SCS103 Aluminium Anti-Seize Compound 500g Tin at the lowest UK prices from Euro Car Parts UK’s No.1 for Car Accessories, Car Styling & Car Care. Buy today Online, In store or by Phone + Branches Nationwide – Next Day UK Free Delivery.

www.eurocarparts.com

 

[carmanmemoranda]

Nothing for me I agree that the dust will stick to anything greasy.

A good wire brush down and clean up.

 

[ReganAndCarter]

OK, thanks. That's what I always did in the past. Reading around a bit more, looks like anti seize is mainly for non moving parts that won't be dismantled for a long time, so not brakes.

 

[Burnerman]

I like to give just a smear of any HMP grease....the shoes do actually move on the backplate, but admittedly not very much.
Backplates rust well too!
Each to his own.
John

 

[Mottie]

I like to give just a smear of any HMP grease....the shoes do actually move on the backplate, but admittedly not very much.
Backplates rust well too!
Each to his own.
John

Stops the squeak when they move too.

 

[Stivino]

I never put any type of grease on any brake parts.
During my apprenticeship, my tradesman kicked my arse for putting Coppaslip on brake pads.
If everything is cleaned properly, nothing will squeal and nothing will stick.
When they come out the factory, they don't come greased. That is what you are trying to achieve when replacing parts.

 

[Burnerman]

OK, but I'd rather my brake pads didn't rust into their lands......
I'll still do things my way!
John

 

[Stivino]

If the backplates are starting to corrode or show signs of wear, it's time to replace them.

 

[carmanmemoranda]

OK, but I'd rather my brake pads didn't rust into their lands......
I'll still do things my way!
John

Some do, some don't.

I'm in the don't camp. But it doesn't make you wrong

 

[ReganAndCarter]

Backplates look ok, in fact all looks quite shiny in there for a 20 year old.

Except the cylinders pishing out everywhere. Got there just in time. More work, more money!

 

[Burnerman]

Very best of luck shifting the brake pipe connection mate........bloody tight they are as a rule.
John